- No comments
As you all know New Technologies introduced everyday. Such a wonderful for everyone. It reduced the man power for any working. Printers is one of the best of them. Brother introduced a printer its brand name is “brother printer“. It is used to print any writing data. But Sometime they work not properly while running important printing like stop printing , zig-jack print, misprint word, light printed and so many issues faced by the people.So that time you are frustrated. But you don’t worry.
Now, we are talking about the common issues of Brother Printer and their solutions are as follows:
1. How can I fix the Brother printer won’t print black.
There are some scenarios that can prevent your brother color laser printer from printing in black. Here are some of the main reasons, which include some things that can be examined before moving away from the situation. Remember that when a new cartridge is installed, these issues will almost always start. Do not blame the cartridge because it is almost never a cartridge, which is at fault, though it is when the problem can be seen first and fix it.
(i) Check the cable and confirm that it is plugged in safely and the cable is not damaged.
(ii) If the other colors are printing correct and the only black is a printing mistake, then chances are you will not be able to keep it properly in your situation. So open up and remove your black ink cartridge. Now put it back and make sure it is set properly in its position.
(iii) If the only black ink is not working and since you have mentioned that it is a new one, then it is likely that you have forgotten to remove the label/tape on the tip and this can cause problems. Remove your ink cartridge and see if the packaging label has been removed or not.
If none of the above methods solves your problem then it is likely that the ink cartridge you bought is bad. Replace the ink cartridge with a new one and make sure that you only use the brand’s recommended ink. Using cheap and poor quality ink can permanently damage your printer.
2.Why do not connected Brother printers to Wi-Fi?
Many times people are complaining about brother Wi-Fi laser printer, not connected to Wi-Fi. This is the reason why we are going to write this solution today that how to repair the brother printer scanner fax, Wi-Fi will not be connected. Now let’s go and connect to Wi-Fi.
(i) Visit the printer or check if the printer has a small interactive display.
(ii) Press the menu key on your printer and Use the down arrow and select the network and press OK.
(iii) Select WLAN and press OK and the next step, select the setup wizard and click OK.
(iv) Finally show the enable or disable it from WLAN and select Enable and Press OK.
The first thing you need to do is turn off your computer and close the printer. Go ahead and unplug it and restart the wireless printer and wait 20 to 30 seconds and then plug it back. Then switch on your computer and then switch on the printer and join everything and try to print again.
3.What is the ‘clean 50’ error on a Brother printer and How do I fix?
Machine Error 50 brother printer error light name in which the error is reported, in which the system component or application got damaged to cause this error with any other information. The error name contains data in the numeric code that can be useless by the component or the creator of the application which has been damaged. Using this code, the error may occur in many different places of the system, so even if it finds some details in its name, it can solve the problem of the user without the specific technical knowledge or appropriate software for the user. It’s still hard to do and fix.
(i) Download Reimage Repair tool and save the file on your desktop so that we can access the file easily. This repair tool is free also easy to download.
(ii) Now, select the file location and double-click it. Yet it will start the installation process. If you prompt the user account control to run the program, click to continue.
(iii) The tool will automatically start the initial scan of your machine. Once the scan is completed, click the Start Up Repair button in the bottom right corner.
(iv) After Reimage your repair must be fixed. You may have to restart your computer to complete the process.
Finally, the processed printer is restarted and check the print a blank page for a test to work properly or not.
4.How can I fix the paper jam problem in Brother printer?
In ordinary circumstances, paper jams should not be too often, as brother printer help is known as very reliable. If they do, then there is probably a piece of paper in the center of the printer.Now, some tips for fixing it.
(i) Press both release buttons at both ends of the module at the same time and delete it.
(ii) Remove the panel and carefully drag jam paper and keep away and clean any small piece of paper.
Note: If the paper jam is approved then make sure that the printer can move the carriage freely. Otherwise continue with the steps given below.
(iii) Press the button at the top of the module and open the door and clean the jammed paper and close the module.
(iv) Check out the carriage to see if it exits from the right side of the printer and in sight. If he is stuck then do not force to move because it can damage your printer.
As a rule, you should ensure that the type of paper being printed is supported by your printer. Remember that to store your paper where it is dry to avoid moisture, printing can be difficult.
5.How do install wireless Brother Printers?
Depending on the operating system, if you are looking for installing techniques for the printer on the wireless network. Here are some tips to install a brother printer without Cd.
(i) New LPR drivers need to be downloaded from Brother’s solution page.
(ii) Hence the file download is completed, double-click to start the file installation and enter the root password.
(iii) If ‘RESULT = 0’ appears and the resultant text output is within the closing package then the driver has been installed properly.
Can be downloaded from the latest CPU drivers from Brother Official Website For printers that are labeled with red ‘*’, some of them can create some links before installing a brother printer with wireless. Hence Get in the touch with us at our technical support team for finding the best solutions to all your issues or quarries. Our support team is available 24*7 to help our customer and providing the best solution for your any issues.