Issues solved by our brother printer support

so here are some issues and solution by our brother printer support team. we are trying to solve our customer’s problem within minutes. if you also want some help and you have one of these issues so you can contact us through our brother printer support group.

1. How can I fix the Brother printer won’t print black.

There are some scenarios that can prevent your brother color laser printer from printing in black. Here are some of the main reasons, which include some things that can be examined before moving away from the situation. Remember that when a new cartridge is installed, these issues will almost always start. Do not blame the cartridge because it is almost never a cartridge, which is at fault, though it is when the problem can be seen first and fix it.

Solution:

(i) Check the cable and confirm that it is plugged in safely and the cable is not damaged.

(ii) If the other colors are printing correct and the only black is a printing mistake, then chances are you will not be able to keep it properly in your situation. So open up and remove your black ink cartridge. Now put it back and make sure it is set properly in its position.

(iii) If the only black ink is not working and since you have mentioned that it is a new one, then it is likely that you have forgotten to remove the label/tape on the tip and this can cause problems. Remove your ink cartridge and see if the packaging label has been removed or not.

If none of the above methods solves your problem then it is likely that the ink cartridge you bought is bad. Replace the ink cartridge with a new one and make sure that you only use the brand’s recommended ink. Using cheap and poor quality ink can permanently damage your printer.

2.Why do not connected Brother printers to Wi-Fi?

 Many times people are complaining about brother Wi-Fi laser printer, not connected to Wi-Fi. This is the reason why we are going to write this solution today that how to repair the brother printer scanner fax, Wi-Fi will not be connected. Now let’s go and connect to Wi-Fi.

Solution:

(i) Visit the printer or check if the printer has a small interactive display.

(ii) Press the menu key on your printer and Use the down arrow and select the network and press OK.

(iii) Select WLAN and press OK and the next step, select the setup wizard and click OK.

(iv) Finally show the enable or disable it from WLAN and select Enable and Press OK.

The first thing you need to do is turn off your computer and close the printer. Go ahead and unplug it and restart the wireless printer and wait 20 to 30 seconds and then plug it back. Then switch on your computer and then switch on the printer and join everything and try to print again.

3.What is the ‘clean 50’ error on a Brother printer and How do I fix?

Machine Error 50 brother printer error light name in which the error is reported, in which the system component or application got damaged to cause this error with any other information. The error name contains data in the numeric code that can be useless by the component or the creator of the application which has been damaged. Using this code, the error may occur in many different places of the system, so even if it finds some details in its name, it can solve the problem of the user without the specific technical knowledge or appropriate software for the user. It’s still hard to do and fix.

Solution:

(i) Download Reimage Repair tool and save the file on your desktop so that we can access the file easily. This repair tool is free also easy to download.

(ii) Now, select the file location and double-click it. Yet it will start the installation process. If you prompt the user account control to run the program, click to continue.

(iii) The tool will automatically start the initial scan of your machine. Once the scan is completed, click the Start Up Repair button in the bottom right corner.

(iv) After Reimage your repair must be fixed. You may have to restart your computer to complete the process.

Finally, the processed printer is restarted and check the print a blank page for a test to work properly or not.

4.How can I fix the paper jam problem in Brother printer?

In ordinary circumstances, paper jams should not be too often, as brother printer help is known as very reliable. If they do, then there is probably a piece of paper in the center of the printer.Now, fix your issues with help of Brother Printer Support.

Solution:

(i) Press both release buttons at both ends of the module at the same time and delete it.

(ii) Remove the panel and carefully drag jam paper and keep away and clean any small piece of paper.

Note: If the paper jam is approved then make sure that the printer can move the carriage freely. Otherwise continue with the steps given below.

(iii) Press the button at the top of the module and open the door and clean the jammed paper and close the module.

(iv) Check out the carriage to see if it exits from the right side of the printer and in sight. If he is stuck then do not force to move because it can damage your printer.

As a rule, you should ensure that the type of paper being printed is supported by your printer. Remember that to store your paper where it is dry to avoid moisture, printing can be difficult.

5.How do install wireless Brother Printers?

Depending on the operating system, if you are looking for installing techniques for the printer on the wireless network. Here are some tips provide by our brother printer suppot how to install a brother printer without Cd.

Solution:

(i) New LPR drivers need to be downloaded from Brother’s solution page.

(ii) Hence the file download is completed, double-click to start the file installation and enter the root password.

(iii) If ‘RESULT = 0’ appears and the resultant text output is within the closing package then the driver has been installed properly.

Can be downloaded from the latest CPU drivers from Brother Official Website For printers that are labeled with red ‘*’, some of them can create some links before installing a brother printer with wireless. Hence Get in the touch with us at our technical support team for finding the best solutions to all your issues or quarries. Our support team is available 24*7 to help our customer and providing the best solution for your any issues.

The post Top 5 common brother printer issues with their solution appeared first on TechCzaR GrouP.

Follow this steps to reset your Belkin wireless.

Note: If you will reset wireless router then will not only help you overcome the problem of connectivity but will change the connectivity rate faster.

1. Step: Now, unplug all the LAN cables from the router then connect router power cord from behind this device.
2. Step: Take a pin or something that is perfectly fine in the reset hole. Now hold the reset button constantly. After some time 15 to 20 seconds, you have to carefully insert the power cord again to ensure that you do not release the reset button in this process.
3. Step: Again power cord inserting, you have to continue to press the reset button.Wait for at least 15 to 20 seconds and then reset button left.
4. Step: After some time 20 to 30 seconds the router will start booting automatically and it will be set back to the original factory default setting.
5. Step: Once it returns to its default setting then you need to enter the router’s password. If you do not know the password then the router is left blank with the default password and the default IP address is 192.168.2.
6. Step: If you completed all process then your router will return to it’s normal and smother style of work.

Steps for set up your Belkin router:

1. Step: Connect your computer direct cable or modem. If you see a login for your Internet Service Provider to your screen then make a note of the password and username.
2. Step: Then Unplug your router and your cable from the computer.
3. Step: Plug your modem to router WAN port then connect your computer to one of Belkin router and wait 10 seconds. After plug in your router and restart your computer.
4. Step: Select to the control panel and then select network connections. After the Right button and show the Local Area Connection to mention your network connection properties.
5. Step: Select the Internet Protocol and click an IP Address Automatically and then click DNS Server Addresses Automatically.
6. Step: At last, Open your web browser to your computer and enter username and password.

Some listed other problem why not working Belkin wireless router and we have solution:

• Firmware update issue.
• IP address issue.
• Device Identification issue.
• Connectivity issue

Now your router will restart and wait for 1 minute. Even after following the above steps your Belkin router is not working. If you have an older router then the problem may be due to the old router firmware. So you have to update your router. Even if you can’t understand how can do? Then don’t worry, without any hassle you get in touch with our technical support team for finding the best solutions to all your quarries related router. Our Belkin support team is available 24*7 to help users with the best solution to any issues. Only you need to dial our toll-free number   Belkin support. and get more information about Belkin our Belkin support team will provide you best solution,

The post How do I reset Belkin router or set up router? appeared first on TechCzaR GrouP.

The router comes via broadband connection, information access router and distributes it on your computer. The router selects the path for packets so that you can get information. A Router is the high-speed data transmission medium. When you use a Wi-Fi service in place of your office or business, it is more important to make sure that your connection is secure or not and confirm that anyone cannot access your router to change password or setting.

Following some step for change Linksys router admin password.

1. Step: Access the Linksys setup page. Open a web browser and enter the default IP address 192.168.1.1 on the Address bar then press enter. If you are using Linksys router default password then leave the field blank. If you don’t access the Linksys configuration interface, someone changed a Linksys router password.
2.  Step: Click the Linksys router admin password interface you will see username and password then changed router password. That is very hard others person to guess your router password. Now your username and password both of keep secure and never forget.

Now, this step will also show to reset your Linksys router password and user Id.

What will be affected if you reset the router.

In order to broadcast and communicate all the proprietary settings that may be set up for your gaming system. On the Internet and applications will be cleared from their memory and they need to be reconfigured again.

1. Find the Reset button on your wireless router and press something like a pen or pin would be required.
2. Hold down the reset button for 20 to 30 seconds while blinking the power button light doing this. Then release the button and unplug the router cable for 30 seconds.
3. Now plug the router cable and connect your wireless device to that log on Linksys router using default settings. All your configuration are erased so you’ll need to reconfigure your router and set a new administrator username and password.

It is important to update your password and username time to time because other people can’t find out the password that you are keeping. Protecting your router receives data from the modem and computer connected to the router network. The network is wireless, any hacker can your on your wireless connection within the router’s signal. Set the password  of your router to WPA 2.0. Data sent to the network and only provides access to users who have a username and password.

Do not easily guess your password keep the strong and powerful.The Router is a communication network and connects to two different computer. Get in touch with us at the technical team for finding the best solutions to all your issues or quarries related router and printer. Our support team is available 24*7 to help our customer and providing best solution for your any issues. For more information visit our Linksys support.

The post How to change Linksys router password with easy steps appeared first on TechCzaR GrouP.

Microsoft office is the most common and easy application to work on a computer. In word processing, you can change words, save the text, align margins in few seconds. Microsoft Word is an advanced version of Word processors. It is a part of Microsoft office suite and most popular word processor. It’s useful to create documents, resumes, reports etc. Microsoft Word is an acronym for Microsoft Word.

This article introduces and guide on how to use Microsoft word. To navigate this guide, it is required for you to be familiar with some basic concepts.

1. Work with Quick Styles:

A style is a present formatting for a document. The document looks like, so it includes the font, font size and so on. Create or change a style of your document make it look’s specific.

To add a new style:

• Select the text.
• In-Home Tab, select Styles.
• Click on the drop-down menu.
• Now the Styles menu is available.
• Press on a style.

To Create a new style:

• Create a new style.
• Select the text.
• In the Styles, menu selects Save Selection as a New Quick Style.
• Name the new style.
• Save the new style

2. Insert and resize picture:

MS word is generally used for writing text.Adding pictures to your document can be a great way to illustrate as well as interesting.When it comes to size image, we are mostly using the drag and drop sizing handles–those little bubbles near the corners of an image that we have selected. That works well as a fast, and its general method. But you may find when this needs to be more precise. For example, if you need just a part of an image?

To insert a picture:

• Go to the main menu, select Insert.
• In the Insert menu, click on Picture.
• A new window will open. Select the picture file.
• Click Insert.

To Resize or Crop a picture:

1. Double click on the picture.
2. A new format menu will appear.
3. Go to the Size section of the Format menu.
4. Adjust the size of the picture in the document.

3. Add comments to a document: 

Word allows you to add comments to your documents.

Comments do not interfere with the main text and appear in their own area of the document.

To add new comments:

• In the main menu select Review.
• Place the cursor where the comment will be located.
• In the Review menu, select New Comment.
• A red balloon will display on a side menu.
• Type the new comment.

4. Create a Table of Contents:

To create a Table of Contents, it is required that each section of the document has a title formatted with a heading style.

Insert a table of contents:

1. In the main menu select References.
2. In the References menu select Table of Contents.
3. Click on Table of Contents.
4. A drop-down menu will appear. In the drop-down menu:
5. Click on one of the predefined styles to insert a Table of Contents.
6. Click on “Insert Table of Contents”
7. A new window will appear.
8. Click options for Page Numbers.
9. Select the style for the tab leaders.
10. Choose the format for the Table of Contents.
11. Select how many levels to show.
12. Select what items to display.
13. A Table of Contents will appear in the document.

5. Compare and Merge Documents:

You can compare and merge two versions of documents. When you compare and merge documents. MS-Word shows the differences between them as tracked changes. If multiple reviewers return their changes and comments in separate documents, you can merge all their changes into a single document and review their changes from that single document.

To compare documents:

1. In the main menu select Review.
2. In Review menu, click on Compare.
3. The Drop-down menu select Compare.
4. A new window will open.
5. In the Compare Documents window:
6. Locate the Original document.
7. Locate the Revised document.
8. Insert a label to indicate the differences.
9. Select the elements to compare.
10. Select where changes should be displayed.

6. Add Citations and References:  

Many times essay or report writers are required to insert citation or bibliography into documents. A citation is used to tell the reader where the information came from and a reference gives the details about the source of what kind of source it is. The references are listed at the end of the report.

To create a citation source:

1. Go to main menu Select References.
2. In the References menu, go to Citations & Bibliography.
3. Select a Citation Style.
4. Click on Insert Citation.
5. In the drop-down menu select “Add New Source”.
6. A new window will appear.
7. Select the type of source.
8. Fill in the required fields.
9. Accept the one created by the program.
10. Click OK.

To insert a Bibliography:

1. Follow the steps provided in “To create a citation source”
2. Go to main menu select References.
3. In the References menu, go to Citations & Bibliography.
4. Select a Citation Style.
5. Click on Bibliography.
6. In the Drop-down menu select Bibliography.
7. The bibliography will appear in the document.

7. Save documents as PDF:

PDF is a great file document. Follow the steps to save documents as PDF.

1. Click on the Office Button.
2. A drop-down menu will appear.
3. Click on “Save As”.
4. A side menu will appear.
5. Click on PDF.
6. Select the location for the file.
7. Click on Save.

Hope the above  Microsoft office guidelines can help you to use the MS Word. In case, if you want to get more information regarding Microsoft Office Suite then you can Contact us .

The post Easy way to Learn the working of Microsoft Office appeared first on TechCzaR GrouP.

How to create and save a Spreadsheet

Open the Microsoft Excel application

In different Windows version, there are two ways to open the Excel program.

• First of all , go to “Start” and then “Programs” to locate the Excel icon.
• Go to Start Screen and press Windows key + Z then click on All apps bar.

Start a new workbook

• Click “File” and further  “New.”
• Select “Blank Workbook,” then “Create.” An empty workbook will open.

Save the workbook

• Click the File menu and select “Save as.”
• Choose a location on your system to save your file, type the name in the “File name” box.

Prepare your worksheet for data storage

By default, Excel workbook has 3 worksheets. Sheet 1 opens by default and you can see this tab at the bottom of the window.

Rename a sheet

• Right click on the Sheet 1 tab.
• Select “Rename” and in addition type the new name.

Save frequently

When you entered the data, your wish to save it. Press the “Ctrl+S” key on your keyboard .

Entering and Managing Data in Excel

Start with entering the data into the cells of the worksheet

If you want to start with one or two columns or rows enter all of data on the sheet.

• Go to a cell and type the data into the cell.
• To edit the data, Double-click the cell of the spreadsheet.

How the cells are formatted

• The “General” format is used by default, but you can change the settings of each cell.
• Formatting can be changed such as a number, date, time, or currency from the “Home” tab.
• However, you can change the font and style by using the “Font” sections of the “Home”

Sort the data

• Select the data you want to sort. You can select single columns or multiple columns and also include text titles.
• Choose the Data tab and click “” The Sort dialog box will display.
• Select the column you want to sort in the “Sort by”. The title of your columns will display in the “Sort by” box.
• Select Values, or Cell Icon. If you have entered text, you want to select Sort On “”
• Select the alphabet order that you want to apply to the sort operation. Either in ascending or descending.

Filter your data

• Selecting the data you wish to filter either one or multiple columns.
• Choose the Data tab, and click “Filter” in the Sort and Filter section.
• Click the arrow to see the list of options.
• Select the values you want to use and click “OK” to see the results. Hence,the rest of data will be hidden. So that you can view the filtered data.
• Restore the data by selecting the “Clear” option in the Sort & Filter section of the Data tab.

Performing Basic Calculations

Use the sum function for basic column adding

• Click on the empty cell below a column you want to add together.
• Click the “AutoSum” symbol to the right on the home tab.
• Select a second time the empty cell will now display the total of the column of numbers.

Add numbers using your own formula

If you want to add numbers that are not lie in one column. You can also create your own formula for adding.

• Click on the empty cell that you like for the sum to appear in.
• Press = sign then type the column letter and row number corresponding to your first number (e.g., B2).
• Type + sign and then click on the next cell and row number corresponding to your second number. For example = B 2+C 5. Repeat until you have selected all of the numbers you wish to add together. Finally, press enter and see the result.

Creating Visuals

Create a chart by selecting the data

• Find the Insert tab and the Charts group.
• Click the type of chart and a chart sub-type.

Create a table by selecting a range of cells to make into a table

Either the cells contain all data or some of them can be empty.

• Find the Home tab and the Styles group. Click on Home tab >Styles group>Format as Table.
• Select the table style.

Hope the above guidelines can help you to use the MS Excel in an easy way. In case, if you want to get more information regarding Microsoft Office Suite then you can Contact us .

The post Easy and simple steps to use Microsoft Excel appeared first on TechCzaR GrouP.